IBM 621858U Installation Guide - Page 19

Features, specifications

Page 19 highlights

Features and specifications The following table provides a summary of the features and specifications of the computer. Depending on the model, some features might not be available, or some specifications might not apply. Use the Configuration/Setup Utility program to determine the type and speed of the microprocessor. Table 1. Features and specifications Microprocessor: v Intel™ Pentium® processor v 2 MB Level-2 cache v 800 MHz front-side bus (FSB) Memory: v Minimum: 1 GB v Maximum: 8 GB v Type: PC2-4200, dual-data-rate 2 (DDR2) un-buffered error correcting code (ECC) v Connectors: four dual inline memory module (DIMM) connectors Internal drives: v Diskette: 1.44 MB (two mode) (optional) v Hard disk drive: SATA, SCSI, or SAS v One of the following drives: - DVD/CD-RW combo: IDE - CD-RW: IDE Expansion bays: v One slim-high 3.5-inch external drive bay, (optional) v Two half-high 5.25-inch bays (optical drive installed in one bay) v Two slim-high 3.5-inch internal drive bays (one hard disk drive installed) PCI expansion slots: v One PCI Express x1 slot v One PCI Express x8 slot (x4 electrical) v One PCI Express x16 slot (support x16 video cards only) v One 33 MHz/32-bit PCI slot Power supply: One 400-watt (115-230 V ac) Cooling: v One speed-controlled fan and one power supply fan Integrated functions: Electrical input: v Broadcom 5721 10/100/1000 Ethernet v Sine-wave input (50 or 60 Hz) required controller with RJ-45 Ethernet connector v Input voltage and frequency ranges v Single-channel SCSI provided by a automatically selected mini-PCI card v Input voltage low range: v Two serial connectors - Minimum: 90 V ac v One parallel connector - Maximum: 137 V ac v Three-port serial ATA controller v Input voltage high range: v Two IEEE 1394 (FireWire) connectors - Minimum: 180 V ac (four-pin on front, six-pin on rear) - Maximum: 265 V ac v Eight Universal Serial Bus (USB) v Input kilovolt-amperes (kVA) approximately: connectors (two on front and six on - Minimum: 0.12 kVA rear) - Maximum: 0.58 kVA v Keyboard connector v Mouse connector Heat output: v Audio connectors Approximate heat output in British thermal - Line out (front and rear) units (Btu) per hour: - Mic (front) v Minimum configuration: 433 Btu (127 watts) - Line in (rear) per hour v Single-channel IDE controller v Maximum configuration: 1948 Btu (571 watts) per hour Video adapter: (depending on the model) v NVIDIA Quadro NVS 280 (DMS-59), Environment: PCI Express x16, with 64 MB DDR v Air temperature: synchronous dynamic random access - Computer on: 10° to 35°C (50° to 95°F) memory (SDRAM) video memory and Altitude: 0 to 2134 m (7000 ft) dual analog connectors (or dual digital - Computer off: -40° to +60°C (-40° to monitor capability with the purchase of 140°F) an additional pigtail cable) Maximum altitude: 2133 m (7000 ft) v ATI FireGL V3100 (DVI-I), PCI Express v Humidity (operating and storage): 8% to x16, with 128 MB DDR SDRAM video 80% memory with dual DVI-I and VGA connectors v NVIDIA FX 1400 (DVI-I), PCI Express x16, with 128 MB DDR SDRAM video Acoustical noise emissions: v Sound power, idle: 4.3 bel v Sound power, operating: 4.9 bel memory with dual DVI-I connectors v ATI FireGL V7100 (DVI-I), PCI Express x16, with 256 MB GDDR3 SDRAM video memory with dual DVI-I connectors v 3DLabs Wildcat Realizm 800 (DVI-I). PCI Express x16, with 512 MB GDDR3 Size: v Height: 435 mm (17.12 in.) v Depth: 445 mm (17.5 in.) v Width: 178 mm (7 in.) v Weight: 10.5 kg (23 lb) to 13.5 kg (30 lb) depending upon configuration (512-bit Unified) and 128 MB GDDR3 (128-bit direct burst) SDRAM video memory with dual DVI-I connectors Chapter 1. Introduction 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78

Features
and
specifications
The
following
table
provides
a
summary
of
the
features
and
specifications
of
the
computer.
Depending
on
the
model,
some
features
might
not
be
available,
or
some
specifications
might
not
apply.
Use
the
Configuration/Setup
Utility
program
to
determine
the
type
and
speed
of
the
microprocessor.
Table
1.
Features
and
specifications
Microprocessor:
v
Intel
Pentium
®
processor
v
2
MB
Level-2
cache
v
800
MHz
front-side
bus
(FSB)
Memory:
v
Minimum:
1
GB
v
Maximum:
8
GB
v
Type:
PC2-4200,
dual-data-rate
2
(DDR2)
un-buffered
error
correcting
code
(ECC)
v
Connectors:
four
dual
inline
memory
module
(DIMM)
connectors
Internal
drives:
v
Diskette:
1.44
MB
(two
mode)
(optional)
v
Hard
disk
drive:
SATA,
SCSI,
or
SAS
v
One
of
the
following
drives:
DVD/CD-RW
combo:
IDE
CD-RW:
IDE
Expansion
bays:
v
One
slim-high
3.5-inch
external
drive
bay,
(optional)
v
Two
half-high
5.25-inch
bays
(optical
drive
installed
in
one
bay)
v
Two
slim-high
3.5-inch
internal
drive
bays
(one
hard
disk
drive
installed)
PCI
expansion
slots:
v
One
PCI
Express
x1
slot
v
One
PCI
Express
x8
slot
(x4
electrical)
v
One
PCI
Express
x16
slot
(support
x16
video
cards
only)
v
One
33
MHz/32-bit
PCI
slot
Power
supply:
One
400-watt
(115-230
V
ac)
Cooling:
v
One
speed-controlled
fan
and
one
power
supply
fan
Integrated
functions:
v
Broadcom
5721
10/100/1000
Ethernet
controller
with
RJ-45
Ethernet
connector
v
Single-channel
SCSI
provided
by
a
mini-PCI
card
v
Two
serial
connectors
v
One
parallel
connector
v
Three-port
serial
ATA
controller
v
Two
IEEE
1394
(FireWire)
connectors
(four-pin
on
front,
six-pin
on
rear)
v
Eight
Universal
Serial
Bus
(USB)
connectors
(two
on
front
and
six
on
rear)
v
Keyboard
connector
v
Mouse
connector
v
Audio
connectors
Line
out
(front
and
rear)
Mic
(front)
Line
in
(rear)
v
Single-channel
IDE
controller
Video
adapter:
(depending
on
the
model)
v
NVIDIA
Quadro
NVS
280
(DMS-59),
PCI
Express
x16,
with
64
MB
DDR
synchronous
dynamic
random
access
memory
(SDRAM)
video
memory
and
dual
analog
connectors
(or
dual
digital
monitor
capability
with
the
purchase
of
an
additional
pigtail
cable)
v
ATI
FireGL
V3100
(DVI-I),
PCI
Express
x16,
with
128
MB
DDR
SDRAM
video
memory
with
dual
DVI-I
and
VGA
connectors
v
NVIDIA
FX
1400
(DVI-I),
PCI
Express
x16,
with
128
MB
DDR
SDRAM
video
memory
with
dual
DVI-I
connectors
v
ATI
FireGL
V7100
(DVI-I),
PCI
Express
x16,
with
256
MB
GDDR3
SDRAM
video
memory
with
dual
DVI-I
connectors
v
3DLabs
Wildcat
Realizm
800
(DVI-I).
PCI
Express
x16,
with
512
MB
GDDR3
(512-bit
Unified)
and
128
MB
GDDR3
(128-bit
direct
burst)
SDRAM
video
memory
with
dual
DVI-I
connectors
Electrical
input:
v
Sine-wave
input
(50
or
60
Hz)
required
v
Input
voltage
and
frequency
ranges
automatically
selected
v
Input
voltage
low
range:
Minimum:
90
V
ac
Maximum:
137
V
ac
v
Input
voltage
high
range:
Minimum:
180
V
ac
Maximum:
265
V
ac
v
Input
kilovolt-amperes
(kVA)
approximately:
Minimum:
0.12
kVA
Maximum:
0.58
kVA
Heat
output:
Approximate
heat
output
in
British
thermal
units
(Btu)
per
hour:
v
Minimum
configuration:
433
Btu
(127
watts)
per
hour
v
Maximum
configuration:
1948
Btu
(571
watts)
per
hour
Environment:
v
Air
temperature:
Computer
on:
10°
to
35°C
(50°
to
95°F)
Altitude:
0
to
2134
m
(7000
ft)
Computer
off:
-40°
to
+60°C
(-40°
to
140°F)
Maximum
altitude:
2133
m
(7000
ft)
v
Humidity
(operating
and
storage):
8%
to
80%
Acoustical
noise
emissions:
v
Sound
power,
idle:
4.3
bel
v
Sound
power,
operating:
4.9
bel
Size:
v
Height:
435
mm
(17.12
in.)
v
Depth:
445
mm
(17.5
in.)
v
Width:
178
mm
(7
in.)
v
Weight:
10.5
kg
(23
lb)
to
13.5
kg
(30
lb)
depending
upon
configuration
Chapter
1.
Introduction
7