IBM 621858U Installation Guide - Page 31
Using, SCSISelect, Utility, program
![]() |
UPC - 000435883148
View all IBM 621858U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
create, configure, and manage arrays. If the CD did not come with the computer, you can download the IBM ServeRAID-8e (Adaptec HostRAID) Support CD from http://www.ibm.com/support/. Configuring the controller: To use the Array Configuration Utility program to configure a RAID level-1 for the computer, complete the following steps: 1. Turn on the computer. 2. When the prompt for Adaptec RAID Configuration Utility appears, Press Ctrl+A. 3. Select Array Configuration Utility (ACU). 4. Select Create Array. 5. From the list of ready drives, select the two drives that you want to group into the array. 6. When asked to select the RAID level, select RAID-1. 7. (Optional) Type an identifier for the array. 8. When asked for the array build method, select Quick Int. 9. Follow the instructions on the screen to complete the configuration, and select Done to exit. 10. Restart the computer. Viewing the configuration: To view information about the Serial ATA controller, complete the following steps: 1. Start the Array Configuration Utility. 2. From the Array Configuration Utility screen, select Manage Arrays. 3. Select an array and press Enter. 4. Press Esc to exit the program. Using the SCSISelect Utility program (for SCSI RAID) Use the SCSISelect Utility program to add RAID level-0 and level-1 functionality to the integrated SCSI controller. This utility is part of the BIOS code in the computer. The integrated SCSI RAID feature (SCSI HostRAID) comes disabled by default. You must enable it and install the device drivers before you can use it. The SCSI RAID configuration utilities, device drivers, and information are available on the IBM ServeRAID-8e (Adaptec HostRAID) Support CD. If this CD does not come with the computer, you can download it from http://www.ibm.com/support/. Enabling the SCSI HostRAID feature: To enable the SCSI RAID feature, complete the following steps: 1. Turn on the computer. 2. When the prompt Press for SCSISelect Utility appears, press Ctrl+A. If you have set a supervisor password, you are prompted to type the password. 3. Use the arrow keys to select the channel for which you want to change settings, and press Enter. 4. Select Configure/View SCSI Controller Setting, and select HostRAID. 5. Select Enabled. 6. Press Esc, and select Yes to save the changes. Using the SCSI HostRAID feature: The instructions in this section describe how to access the SCSI RAID feature from the SCSISelect Utility program and perform Chapter 3. Configuring the computer 19
![](/manual_guide/products/ibm-621858u-installation-guide-dec32bd/31.png)