IBM 621858U Installation Guide - Page 32
Using, SAS/SATA, Configuration, Utility, program, Serial, Attached
![]() |
UPC - 000435883148
View all IBM 621858U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
an initial RAID level-1 configuration. If you install a RAID adapter in the computer, use the configuration method described in the instructions that come with that adapter to view or change SCSI settings for attached devices. See the documentation on the IBM ServeRAID-8e (Adaptec HostRAID) Support CD for additional information about how to use the SCSI HostRAID feature. Configuring the controller: To use the SCSI HostRAID feature to configure a RAID level-1 array, complete the following steps: 1. From the SCSISelect main menu, select Configure/View HostRAID Settings. 2. From the list of ready drives, type C to create an array. 3. When asked to select the RAID type, select RAID-1. 4. From the list of ready drives, select the two drives that you want to group into the array. 5. Select Create new RAID-1. 6. Type an identifier for the array. 7. Select Yes to create the array. 8. Press Esc to exit the utility. 9. Restart the computer. Viewing the configuration: You can use the SCSISelect Utility program to review information about the integrated SCSI controller. From the list of available arrays, select an array and press Enter. Press Esc to exit the utility. Using SAS/SATA Configuration Utility program (for Serial Attached SCSI RAID) Use the SAS/SATA Configuration Utility within the Adaptec RAID Configuration Utility program to add RAID level-0 and level-1 functionality to the SAS controller. The SAS/SATA Configuration Utility is part of the BIOS code in the computer. For additional information about using the Adaptec RAID Configuration Utility programs, see the documentation on the IBM ServeRAID-8e (Adaptec HostRAID) Support CD. If this CD does not come with the computer, you can download it from http://www.ibm.com/support/. The SAS HostRAID feature comes disabled by default. You must enable it and install the device drivers before you can use it. The SAS HostRAID feature configuration utilities, devices drivers, and information are available on the IBM ServeRAID-8e (Adaptec HostRAID) Support CD. Enabling the SAS HostRAID feature: To enable the SAS RAID feature, complete the following steps: 1. Turn on the computer and watch the monitor screen. 2. When the message Press for SAS/SATA Configuration Utility appears, press Ctrl+A. 3. Select SerialSelect Utility. 4. Select Controller Configuration. 5. Select RAID support. 6. Select Enabled. Using the SAS HostRAID feature: The instructions in this section are for using the Array Configuration Utility program to access and perform an initial RAID level-1 20 IBM IntelliStation M Pro Type 6218: Installation Guide
![](/manual_guide/products/ibm-621858u-installation-guide-dec32bd/32.png)