IBM 6862 User Guide - Page 100

Devices and I/O Ports If you select the Devices and I/O Ports option from the Configuration/Setup Utility main menu, you can view and, in some cases, change device or port settings. Note: The specific device options might vary, depending on the computer model. You can change port assignments or disable ports if you want to prevent unauthorized transmission of data to any devices attached to the ports. Item Mouse Diskette Drive A Diskette Drive B Serial Port Setup Serial Port A Address Serial Port A IRQ Serial Port B Address Serial Port B IRQ USB Setup USB Support USB Keyboard/Mouse Support Description You must select whether the mouse is installed or not in this field. If a drive is installed, this field shows the diskette storage capacity of the drive. If you change or add a diskette drive, you might need to use this option to set the correct type. If a drive is installed, this field shows the diskette storage capacity of the drive. If you change or add a diskette drive, you might need to use this option to set the correct type. The Serial Port Setup menu shows the addresses and interrupts for the built-in serial ports. If you add adapter cards with serial ports, an error message will notify you if you have an address conflict among the serial ports. Ensure that each serial port has a different address. If you change serial port addresses in this menu, you might also need to make changes in the software that uses serial ports. For instructions on changing your software, see the user's guide or online information that comes with the software. The USB Setup menu lets you enable or disable the Universal Serial Bus feature. Select Autodetect for USB Keyboard/Mouse Support if you want this support to be enabled when a USB keyboard or a USB mouse is detected after the computer is started. Select Disabled if you will not be using a USB keyboard or USB mouse. 82 Using Your Personal Computer