IBM 6862 User Guide - Page 178
Other error messages that might occur are shown below.
![]() |
UPC - 087944469841
View all IBM 6862 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Other error messages that might occur are shown below. Note: An x value that follows an error code represents any alphanumeric character. Error Code RPL-ROM-ERR: 100 RPL-ROM-ERR: 101 RPL-ROM-ERR: 102 RPL-ROM-ERR: 103 RPL-ROM-ERR: 104 RPL-ROM-ERR: 105 RPL-ROM-ERR: 106 Description The integrated Ethernet controller cannot be found. Action: Make sure that the Ethernet controller is enabled in the BIOS. If the problem persists, have the system serviced. The integrated Ethernet controller was unable to initialize. Action: Make sure that the Ethernet controller is enabled in the BIOS. If the problem persists, have the system serviced. The integrated Ethernet controller could not be reset. Action: Make sure that the Ethernet controller is enabled in the BIOS. If the problem persists, have the system serviced. There are multiple Ethernet controllers or adapters in the system. Action: Specify the correct serial number in the NET.CFG file. The integrated Ethernet controller EEPROM is faulty or not present. The integrated Ethernet failed the loopback test. A power-on diagnostic test performed by the Ethernet module did not execute correctly. Action: Have the system serviced. The integrated Ethernet controller is configured for Plug and Play in a non-Plug and Play system. 160 Using Your Personal Computer
![](/manual_guide/products/ibm-6862-user-guide-3672afd/178.png)