IBM 6862 User Guide - Page 141

POST Message 1962 2462 8601 8603 I9990301 Other Numbers Description A startup sequence error occurred. Action: 1. Make sure the settings for startup options are correct in the Configuration/Setup Utility program. If the settings are not correct, change and save them. For instructions, see Chapter 5, "Using the Configuration/Setup Utility program" on page 61. 2. Make sure the primary IDE (or, if applicable, SCSI) cable is properly installed and securely connected. 3. Make sure all adapters are installed correctly. For instructions on adding adapters, see Installing Options in Your Personal Computer. If the problem cannot be isolated and corrected, have the computer serviced. A video configuration error occurred. Action: 1. Make sure the monitor signal cable is securely attached to the monitor connector. (For the location of the monitor connector, refer to "External connectors" on page 14.) 2. If you just added or removed video memory, you must save the new configuration in the Configuration/Setup Utility program. Refer to the Important text box on page 64 for further information and instructions on saving the configuration. If the problem cannot be isolated and corrected, have the computer serviced. A pointing device or system board error occurred. Action: Have the computer serviced. A hard disk failure occurred. Action: Have the computer serviced. The computer POST found an error. Action: Follow the instructions on the screen. Chapter 7. Solving problems 123