IBM 847691U Hardware Maintenance Manual - Page 198
Table 12 of 2. Ethernet Controller Messages, Error Code, Description, Action
![]() |
View all IBM 847691U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Table 12 (Page 1 of 2). Ethernet Controller Messages Error Code Description RPL-ROM-ERR: 100 The integrated Ethernet controller cannot be found. Action: Make sure that the Ethernet controller is enabled in the BIOS. If the problem persists, replace the system board. RPL-ROM-ERR: 101 The integrated Ethernet controller was unable to initialize. Action: Make sure that the Ethernet controller is enabled in the BIOS. If the problem persists, replace the system board. RPL-ROM-ERR: 102 The integrated Ethernet controller could not be reset. Action: Make sure that the Ethernet controller is enabled in the BIOS. If the problem persists, replace the system board. RPL-ROM-ERR: 103 There are multiple Ethernet controllers or adapters in the system. Action: Specify the correct serial number in the NET.CFG file. RPL-ROM-ERR: 104 The integrated Ethernet controller EEPROM is faulty or not present. RPL-ROM-ERR: 105 The integrated Ethernet failed the loopback test. A power-on diagnostic test performed by the Ethernet module did not execute correctly. Action: Replace the system board. RPL-ROM-ERR: 106 The integrated Ethernet controller is configured for Plug and Play in a non-Plug and Play system. RPL-ROM-ERR: 107 The media test failed. Action: The cable from the LAN is not securely connected to the Ethernet port on the server. Check the cable to ensure that it is properly connected. RPL-ROM-ERR: 110 The integrated Ethernet controller RAM failed the memory test. Action: Replace the system board. E61 Service boot (startup) canceled; that is, the boot diskette image was not downloaded from the network. Action: No action is required. E62 Cannot initialize controller. E63 Cannot initialize controller. E67 Cannot initialize controller. E6d Cannot find boot protocol (BOOTP) server. E6e Cannot start from downloaded image. E71 Too many multicast trivial file transfer protocol (MTFTP) packages. M10 Address resolution protocol (ARP) canceled by keystroke. Action: No action is required. M11 ARP timeout. M20 Cannot copy memory. M21 Cannot write to memory. M22 Cannot write to memory. 190 Netfinity Server HMM
![](/manual_guide/products/ibm-847620u-hardware-maintenance-manual-4ef1215/198.png)