IBM 847691U Hardware Maintenance Manual - Page 69
ISA and PCI adapters, Alert on LAN and Asset ID
View all IBM 847691U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
ISA and PCI adapters: The server uses a riser card for expansion. The riser card contains expansion slot connectors that connect adapters to the industry standard architecture (ISA) and peripheral component interconnect (PCI) buses. You can install a variety of adapters in the expansion slot connectors on the riser card. For information on locating the riser card, see "System board illustration" on page 142. For an illustration of the expansion slots that are located on the rear of the server, see "Input/Output connectors" on page 94. The riser card in the server has three dedicated ISA slot connectors and three dedicated PCI slot connectors. The following illustration shows the expansion slot connectors and other connectors on the riser card. ISA ISA ISA PCI PCI PCI CD Audio Connector 340-Pin Connector Alert on LAN Connector Disk Fan A Connector Disk Fan B Connector Front Fan Connector SCSI Hard Disk LED Connector Wake on LAN Connector Asset ID Antenna Connector Chassis-Intrusion Detector Connector Internal Speaker Connector Modem Wakeup Connector Notes 1. Alert on LAN and Asset ID™ are available on some models only. 2. If you attach a 4-position cable connector to the 2-pin Modem Wakeup connector, ensure that the unused positions are next to the bottom of the riser card, as shown in the illustration. If this cable is incorrectly attached, the server might automatically restart each time that you Power-off the power. IBM Netfinity 3000 - Type 8476 61