IBM 847691U Hardware Maintenance Manual - Page 71
riser card., You might have to remove the system board and
View all IBM 847691U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
1. Review the instructions that come with the adapter to determine if it must be installed in an ISA or PCI expansion slot; otherwise, use any empty, bus-compatible slot. 2. Remove the server side cover (see "Disconnecting cables and removing the side cover" on page 84). 3. If necessary, remove the bottom cover (see "Bottom cover" on page 71). 4. Remove the screw and bracket. 5. Remove the appropriate expansion-slot cover: a. Remove the expansion-slot screw on the top of the expansion-slot cover. b. Slide the expansion-slot cover out of the server. c. Store the expansion-slot cover in a safe place for future use. 6. Touch the static-protective package that contains the adapter to any unpainted metal surface on the server; then, remove the adapter from the package. 7. Install the adapter into the appropriate slot on the riser card. You might have to remove the system board and the front fan in order to slide the adapter into the slot. See "Front fan" on page 92 and "System board" on page 139. Note The components of a PCI adapter face down toward the system board, and the components of an ISA adapter face up. If a component in the server or on the adapter interferes with the installation, use another slot. IBM Netfinity 3000 - Type 8476 63