IBM 847691U Hardware Maintenance Manual - Page 45
Power management, ISA Legacy Resources, Available], Attention, ACPI BIOS Mode, Disabled, ACPI BIOS
View all IBM 847691U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
1. Select ISA Legacy Resources; then, use the Up Arrow (↑) or Down Arrow (↓) key to highlight the system resource that you want to change. 2. Select a resource; then, use the Left Arrow (←) or Right Arrow (→) key to select a configuration choice. If you remove an ISA legacy adapter, you must redefine the system resource as [Available]. Power management : With Power Management, the server and monitor can be set to use a reduced-power state if they are inactive for a specified length of time. You can also specify options to automatically start the server. Attention The ACPI BIOS Mode feature is the only available Power Management feature. The APM BIOS Mode feature is set to Disabled. Do not change this default value. Using the Automatic configuration and power interface BIOS mode : When the automatic configuration and power interface (ACPI) BIOS mode is enabled, the operating system controls the power management features of the server and the settings for APM BIOS mode are ignored. Refer to the operating-system documentation to determine if the operating system supports ACPI. If the operating system does not support ACPI, you cannot use the ACPI BIOS Mode Power Management feature. To set ACPI BIOS mode: 1. Select Power Management from the Configuration/Setup Utility program menu. 2. Set ACPI BIOS Mode to Enabled or Disabled as desired using the Left Arrow (←) or Right Arrow (→) key. IBM Netfinity 3000 - Type 8476 37