IBM 847691U Hardware Maintenance Manual - Page 70
Installing or removing ISA and PCI, adapters, Attention, Notes, ISA Resource], Available]
![]() |
View all IBM 847691U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
ISA ISA ISA PCI PCI PCI CD Audio Connector 340-Pin Connector Alert on LAN Connector Disk Fan A Connector Disk Fan B Connector Front Fan Connector SCSI Hard Disk LED Connector Wake on LAN Connector Asset ID Antenna Connector Chassis-Intrusion Detector Connector Internal Speaker Connector Modem Wakeup Connector Attention To avoid possible damage to adapters and server components, be sure that the adapters that you install do not touch each other or the other components (such as the microprocessor) inside the server. Installing or removing ISA and PCI adapters: This section gives the procedure for installing an ISA or PCI adapter. If you want to remove an ISA or PCI adapter, reverse the order of the following steps. If you need to install an AGP adapter in the dedicated AGP slot connector, go to "Installing or removing AGP adapters" on page 65. Notes 1. See "Input/Output connectors" on page 94 for an illustration of the expansion slots on the rear of the server. 2. If you install an ISA legacy adapter, set the resources to [ISA Resource]; this reserves the resources for the legacy adapter and prevents the BIOS from using these resources for the system or other adapters. If you remove an adapter, reassign the system resources as [Available] for ISA legacy adapters. See "ISA legacy resources" on page 36. 3. To install some adapters, especially full-length adapters, you might need to remove the bottom cover, system board, microprocessor, and front fan. Notes Read "Safety information" on page 212. Read the documentation that comes with the option. Read "Accessing the system board" on page 59. To install an ISA or PCI adapter: 62 Netfinity Server HMM
![](/manual_guide/products/ibm-847620u-hardware-maintenance-manual-4ef1215/70.png)