IBM 847691U Hardware Maintenance Manual - Page 88
Attention, Caution, Power-on the server and all attached devices.
View all IBM 847691U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Attention In the United Kingdom, by law, the telephone cable must be connected after the power cord. Caution When the power-cord strain-relief bracket option is installed on the power cord, the server must be plugged to a power source that is easily accessible. 6. Reconnect the cables to the back of the server; then, plug the power cords into properly grounded electrical outlets. Keyboard Mouse Monitor Parallel Device Serial Device USB Device Ethernet Device Audio Devices SCSI Device 7. If you have a modem or fax machine attached to the server, and you are not in the United Kingdom, reconnect the telephone line to the wall outlet and the server, and plug the power cords into properly grounded electrical outlets. If you are in the United Kingdom, plug in the power cords first; then, connect the telephone line to the wall outlet and the server. 8. Power-on the server and all attached devices. Attention To allow for air circulation, be sure to maintain the following minimum clearances around the server: 102 mm (4 in.) in the front 127 mm (5 in.) in the rear 51 mm (2 in.) on the left and right sides When you have completed installing the covers and cables, go to "Updating the server configuration" on page 150. 80 Netfinity Server HMM