IBM 847691U Hardware Maintenance Manual - Page 78
Start the Configuration/Setup Utility program and, after you replace the battery, an error message
View all IBM 847691U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
2. Remove the battery: a. Use one finger to lift the battery clip over the battery. b. Use one finger to slightly slide the battery toward the front of the server. The spring mechanism behind the battery will push it out toward you as you slide it forward. c. Use your thumb and index finger to pull the battery from under the battery clip. d. Ensure that the battery clip is touching the base of the battery socket by pressing gently on the clip. 3. Insert the new battery: a. Tilt the battery so that you can insert it into the front of the socket, under the battery clip. b. As you slide it under the battery clip, press the battery down into the socket. 4. Reinstall the server covers and complete the installation (see "Completing the installation" on page 77). Note When you turn on the server for the first time after you replace the battery, an error message might appear. This is normal after battery replacement. 5. Start the Configuration/Setup Utility program and reset configuration parameters as needed. To reset the system date and time, go to "Date and time" on page 26. To reset the power-on password, go to "Setting power-on password modes" on page 27. To reconfigure the system, follow the instructions given in "Configuration/Setup utility program" on page 21 (all models). 70 Netfinity Server HMM