IBM 847691U Hardware Maintenance Manual - Page 79
Bottom cover, Attention, To remove the bottom cover
View all IBM 847691U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Bottom cover Attention The presence of 5 V ac standby power might result in damage to the hardware unless you disconnect the power cord from the wall before you open the server. Note Read "Safety information" on page 212. Read the documentation that comes with the option. To remove the bottom cover: 1. Remove the server side cover (see "Disconnecting cables and removing the side cover" on page 84). 2. Position the server as described in "Accessing the system board" on page 59. 3. Remove the screws from the bottom cover. 4. Pivot the end of the bottom cover away from the server frame. Note The server bottom cover might look different from the bottom cover in this illustration. 5. Slide the tabs on the end of the cover out of their openings and remove the cover. To replace the bottom cover: 1. Hold the bottom cover at an angle and align the tabs on the end with the openings in the frame. 2. Fit the tabs into the openings and pivot the bottom cover until it is closed. IBM Netfinity 3000 - Type 8476 71