IBM 847691U Hardware Maintenance Manual - Page 40
Using the enhanced security features
![]() |
View all IBM 847691U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
To delete an administrator password: 1. From the Configuration/Setup Utility program menu, select System Security; then, press Enter. 2. The System Security menu appears. 3. Select Administrator Password; then, press Enter. 4. The Administrator Password menu appears. 5. Select Administrator Password. 6. Select Delete Administrator Password and follow the instructions on the screen. If both a power-on and administrator password are set, you can enter either password to complete the system startup. However, the administrator password provides access to all menu choices, and provides the ability to change information. If you enter the power-on password, you can view limited information in the Configuration/Setup Utility program, but you cannot change any settings. Using the enhanced security features : With enhanced security, the administrator password and drive-startup sequence are stored in a highly protected, nonvolatile, security EEPROM module. When the administrator password and drive-startup sequence are stored in the security EEPROM, they remain intact even if the battery expires or is removed. Attention Administrator Password Users: If enhanced security is enabled, and you forget or lose the administrator password, you must replace the system board in the server to regain access to the Configuration/Setup Utility program. If enhanced security is enabled and you have set an administrator password, the server will operate as follows: The security EEPROM is protected from unauthorized access once the startup procedures are complete. With enhanced security disabled, the contents of the EEPROM are write protected, and the server can function in a network environment because the POST/BIOS utility program will allow updates to the system programs. With enhanced security enabled, the POST/BIOS utility program will not allow updates to the system programs. In a network environment, this might prevent certain functions from being performed remotely. If the cover of the server has been removed, a tamper-detection feature will halt system processing and deny access to the keyboard and mouse until the administrator password is entered. This feature will work if the server is powered on or off. To enable or disable enhanced security: 32 Netfinity Server HMM
![](/manual_guide/products/ibm-847620u-hardware-maintenance-manual-4ef1215/40.png)