IBM 8480 Hardware Maintenance Manual - Page 102
management
UPC - 087944878070
View all IBM 8480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Note: See "System" on page 112 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 166-201-003 System Management: Failed 1. Reseat cables between the system board and the power supply (I2C bus error(s) See SERVPROC and or power cage assembly, if installed. DIAGS entries in event log.) 2. Power cage assembly, if installed. 3. System board. 166-201-004 System Management: Failed 1. DASD backplane (I2C bus error(s) See SERVPROC and DIAGS entries in event log.) 2. System board 166-201-005 System Management: Failed 1. Reseat Memory DIMMs. (I2C bus error(s) See SERVPROC and DIAGS entries in event log.) 2. Reseat microprocessors. 3. Memory DIMMs. 4. Microprocessors. 5. System board. 166-250-000 System Management: Failed 1. If installed, reseat the I2C cable between the Remote (I2C cable is disconnected. Reconnect I2C Supervisor Adapter (in PCI slot 1/J14) and system management cable between Remote Supervisor Adapter connector on the PCI riser card. and system board.) 2. I2C cables. 3. Advanced System Management adapter. 4. System board. 166-260-000 System Management: Failed 1. Disconnect all server and option power cords from the server, (Restart ASM Error. After restarting, ASM wait 30 seconds, reconnect, and retry. communication was lost. Unplug and cold boot to reset ASM.) 2. Reseat the Remote Supervisor Adapter (in PCI slot 1/J14). 3. Remote Supervisor Adapter. 166-342-000 System Management: Failed 1. Ensure the latest firmware levels for Remote Supervisor (ASM adapter BIST indicate failed tests.) Adapter and BIOS. 2. Disconnect all server and option power cords from server, wait 30 seconds, reconnect, and retry. 3. Remote Supervisor Adapter. 166-400-000 System Management: Failed 1. Reflash or update firmware for ISMP. (ISMP self test result failed tests: x where x = Flash, RAM, or ROM.) 2. System board. 180-XXX-000 (Diagnostics LED failure.) v Run diagnostics panel LED test for the failing LED. 180-XXX-001 (Failed front LED panel test.) 1. Operator information panel. 2. System board. 180-XXX-002 (Failed diagnostics LED panel test.) 1. Diagnostics panel. 2. System board. 180-361-003 (Failed fan LED test.) 1. Fan. 2. System board. 180-XXX-003 (Failed system board LED test.) v System board. 180-XXX-005 (Failed SCSI backplane LED test.) 1. SCSI backplane. 2. SCSI backplane cable. 3. System board. 92 IBM xSeries 205 Type 8480: Hardware Maintenance Manual and Troubleshooting Guide