IBM 8480 Hardware Maintenance Manual - Page 84
apertures.
UPC - 087944878070
View all IBM 8480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Rear fan Note: v Read "Safety information" on page 119. v Read "System reliability considerations" on page 33. To remove the rear fan, complete the following steps: 1. Turn off the server, if it is on. 2. Unplug the server. 3. Remove the cover. See "Removing the side cover" on page 40. 4. Remove the support-bracket assembly. See "Removing the side cover" on page 40. 5. Remove the fan cable from the system board. 6. Use side cutters to sever the four rubber extensions on the outside of the server. 7. Gently pry the fan away from the server and lift it up and out. 8. To install the new fan assembly, place the fan in position at the rear of the server. 9. Guide the rubber extensions through the apertures. 10. Use needle-nosed pliers to pull the extensions through the apertures. Rear Fan Rubber extensions 11. Reconnect cables. 74 IBM xSeries 205 Type 8480: Hardware Maintenance Manual and Troubleshooting Guide