IBM 8480 Hardware Maintenance Manual - Page 55
connectors
UPC - 087944878070
View all IBM 8480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Installing a SCSI adapter Complete the following steps to install a SCSI adapter: 1. Complete steps 1 through 9 of "Installing an adapter" on page 43. 2. Connect the SCSI signal cable to the adapter and one or more of the signal cable connectors to the rear of the SCSI devices. 3. Connect the SCSI activity indicator cable to the adapter and to the SCSI LED connector on the system board. See "System and PCI extender boards" on page 34 for the location of the SCSI LED connector. SCSI cable RAID adapter SCSI connector 4. If you have other adapters or options to install or remove, do so now. 5. Rotate the front adapter-support bracket to the closed (locked) position. 6. Reinstall the rear adapter-support bracket; then, rotate it to the closed (locked) position. 7. Replace the frame-support bracket. 8. Replace the side cover. See "Replacing the side cover" on page 59 for details. 9. Reconnect the external cables and power cords; then, turn on the attached devices and the server. Chapter 4. Installing options 45