IBM 8480 Hardware Maintenance Manual - Page 70
Replacing, battery
UPC - 087944878070
View all IBM 8480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Replacing the battery When replacing the battery, you must replace it with a lithium battery of the same type from the same manufacturer. To avoid possible danger, read and follow the information in "Safety information" on page 119. To order replacement batteries, call 1-800-772-2227 within the United States, and 1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and Canada, call your IBM reseller or IBM marketing representative. Note: After you replace the battery, you must reconfigure your server and reset the system date and time. Complete the following steps to replace the battery: 1. Follow any special handling and installation instructions supplied with the replacement battery. 2. Turn off the server and all attached devices. Disconnect all external cables and power cords; then, remove the side cover and frame-support bracket. See "Removing the side cover" on page 40 and "Removing the frame-support bracket" on page 41. 3. Complete the following steps to remove the battery: a. Use one fingernail to press the top of the battery clip away from the battery. The battery pops up when released. b. Use your thumb and index finger to lift the battery from the socket. 4. Complete the following steps to insert the new battery: a. Tilt the battery so that you can insert it into the socket on the side opposite the battery clip. b. Press the battery down into the socket until it clicks into place. Make sure the battery clip holds the battery securely. 5. Replace the frame-support bracket and the side cover and connect the cables. See "Replacing the side cover" on page 59. 6. Turn on the server. 7. Start the Configuration/Setup Utility program and set configuration parameters. v Set the system date and time. v Set passwords if necessary. v Save the configuration. 60 IBM xSeries 205 Type 8480: Hardware Maintenance Manual and Troubleshooting Guide