IBM 8480 Hardware Maintenance Manual - Page 68
Installing, security
UPC - 087944878070
View all IBM 8480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
7. If there is a gap between the DIMM and the retaining clips, the DIMM has not been correctly installed. Open the retaining clips, remove the DIMM, then reinsert it. 8. If you have other options to install or remove, do so now. 9. Replace the frame-support bracket. 10. Replace the side cover. See "Replacing the side cover" on page 59. 11. Reconnect the external cables and power cords. Turn on the attached devices, and turn on the server. Installing a security rope clip To help prevent theft, you can add a security rope clip and cable to your server. Complete the following steps to install the rope clip: 1. Review the safety precautions listed in "Safety information" on page 119. 2. Turn off the server and all attached devices. Disconnect all external cables and power cords; then, remove the side cover. See "Removing the side cover" on page 40 for details. 3. Use a screwdriver to remove the two metal knockouts. 4. Insert the rope clip through the rear panel; then attach and tighten the nuts. 5. Thread the cable through the rope clip and around an object that is not part of or permanently secured to the building structure or foundation and from which the cable cannot be removed. Fasten the cable ends together with a lock. After you add the security cable, be certain it does not interfere with other cables connected to the server. Rope clip 6. Reconnect the external cables and power cords, and turn on the attached devices, and then the server. 58 IBM xSeries 205 Type 8480: Hardware Maintenance Manual and Troubleshooting Guide