IBM 865951Y Hardware Maintenance Manual - Page 108

Before you begin You will need the following items: - Flat-blade screwdriver - 8-inch adjustable wrench or pliers - Tape - Pencil Some of the installation procedures require two people. Before you begin to install the server in the rack enclosure, review the safety and handling guidelines specified under "Safety information" on page 176. These guidelines will help you work safely while working with the server and options. Review the documentation that comes with the rack enclosure for additional safety, cabling, and operating considerations. To ensure cabinet stability, install the servers starting from the bottom of the rack enclosure. Note If you are installing different server models in the rack enclosure, install the heaviest models in the lower part of the rack enclosure. Ensure that you plan the rack enclosure installation within the guidelines for: - Heat generation - Electrical requirements - Air flow - Mechanical loading Verify that the rack enclosure can meet the following rack model operating parameters: Size - Depth: 560 mm (22.05 in.) - Height: 230 mm (9.06 in.) - Width: 420 mm (16.54 in.) Weight Typical server as shipped: 39 kg (85.8 lb) Environment Air temperature: - Server on: 10° to 35° C (50° to 95° F) Altitude: 0 to 914 m (3000 ft.) - Server on: 10° to 32° C (50° to 90° F) Altitude: 914 m (3000 ft.) to 2133 m (7000 ft.) - Server off: 10° to 43° C (50° to 110° F) Maximum Altitude: 2133 m (7000 ft.) Humidity: - Server on: 8% to 80% 100 Netfinity Server HMM