IBM 865951Y Hardware Maintenance Manual - Page 88
Completing the rack model installation, is secured.
UPC - 087944501824
View all IBM 865951Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Completing the rack model installation 1. Replace the top cover: a. Align the top cover with the top of the server, about 25 mm (1 inch) from the front of the server. b. Hold the cover against the server and slide the cover toward the front of the server until the cover clicks into place. Note Be sure the front edge of the cover is flat against the server. c. Turn the captive thumbscrew 1 until the cover is secured. 2. Replace the bezel, if it was removed. a. Place the bezel tabs 2 in the slots at the left front of the server. b. Press the right end of the bezel toward the server front until the bezel clicks into place. 80 Netfinity Server HMM
Completing the rack model installation
1.
Replace the top cover:
a.
Align the top cover with the top of the server,
about 25 mm (1 inch) from the front of the
server.
b.
Hold the cover against the server and slide the
cover toward the front of the server until the
cover clicks into place.
Note
Be sure the front edge of the cover is flat
against the server.
c.
Turn the captive thumbscrew
±1²
until the cover
is secured.
2.
Replace the bezel, if it was removed.
a.
Place the bezel tabs
±2²
in the slots at the left
front of the server.
b.
Press the right end of the bezel toward the
server front until the bezel clicks into place.
80
Netfinity Server HMM