IBM 865951Y Hardware Maintenance Manual - Page 85
Completing the installation, Completing the tower model installation, Before you begin
UPC - 087944501824
View all IBM 865951Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Completing the installation Before you begin Complete all the installation procedures for the internal options you have chosen to install. Read "Safety information" on page 176. If you have a tower model, continue with "Completing the tower model installation." If you have a rack model, go to "Completing the rack model installation" on page 80. Completing the tower model installation 1. Install the cover on the server. a. Align the left-side cover with the left side of the server, about 25 mm (1 inch) from the front of the server; place the bottom of the left-side cover on the bottom rail of the left-side frame. b. Insert the tabs at the top of the cover into the slots at the top of the server side. c. Hold the cover against the server and slide the cover toward the front of the server until the cover clicks into place. Note Be sure the front edge of the cover is flat against the server. 2. Replace the bezel, if it was removed. a. Place the bezel tabs 1 in the slots at the bottom front of the server. b. Press the top of the bezel toward the server front until the bezel clicks into place. Netfinity 5000 - Type 8659 77