IBM 865951Y Hardware Maintenance Manual - Page 110
Installing the rack model in a rack, enclosure, Preparing the server
UPC - 087944501824
View all IBM 865951Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Installing the rack model in a rack enclosure: During this procedure, you must install parts on the rack enclosure and the server. This process can be divided into three parts: Preparing the server Preparing the rack enclosure Installing the server into the rack enclosure Before you begin Read "Safety information" on page 176 and the safety information in the rack enclosure documentation. Turn off the server, if it is on. Refer to the rack enclosure documentation for additional information on preparing the rack. Preparing the server: In this section, you will use the following parts: One cable arm bracket The inner slide from two slide bracket assemblies 6 pan-head short screws (M4 by 5 mm) 32 kg (70.5 lbs) 55 kg (121.2 lbs) Caution Use safe lifting practices when lifting the machine. Attention To avoid damage to internal components, use only the pan-head short screws (M4 by 5 mm) included with the Rack Mount Kit. 102 Netfinity Server HMM