IBM 865951Y Hardware Maintenance Manual - Page 145
SCSI jumpers, Table 8. Backplane Option Jumper Block, Table 9. SCSI IDs for Hot-Swap Drives
![]() |
UPC - 087944501824
View all IBM 865951Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
SCSI jumpers The option jumper block on the DASD (SCSI) backplane defines the SCSI IDs for hot-swap drives. See the illustration in "DASD backplane jumper block location" on page 138 for the location of the option jumper block. The following table summarizes the settings for the DASD backplane SCSI option jumper block (J4). Table 8. Backplane Option Jumper Block Pins Description 1-2 (A0) Removing the jumper from these two pins reverses the SCSI IDs on the backplane. For the tower model, these two pins are jumpered; for the rack model, the jumper usually is removed. 3-4 (A1) Reserved. No jumper. 5-6 (A2) These pins are always jumpered. Tower Addressing Rack (Reversed) Addressing A2 A2 A1 J4 A1 J4 A0 A0 The following table shows the SCSI IDs that you can use for hot-swap drives. Table 9. SCSI IDs for Hot-Swap Drives J4 Pins 1-2 (A0) Bay Bay Bay Bay Bay 1 2 3 4 5 Jumpered (tower orientation) 0 1 2 3 4 Jumper removed, DASD enclosure not rotated 4 3 2 1 0 Jumper removed, DASD enclosure rotated for rack orientation 0 1 2 3 4 Notes: When the DASD enclosure on a tower model has been rotated for rack-mount orientation and the jumper has been removed, the bays correspond to the rack model illustration on page 64. Netfinity 5000 - Type 8659 137
![](/manual_guide/products/ibm-86595ry-hardware-maintenance-manual-a5411ab/145.png)