IBM 865951Y Hardware Maintenance Manual - Page 21
Viewing the test log, Hardware Info, Enter., Utility, View Test Log, Exit Diags
![]() |
UPC - 087944501824
View all IBM 865951Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Also, you can view server configuration information (such as system configuration, memory contents, interrupt request (IRQ) use, direct memory access (DMA) use, device drivers, and so on) by selecting Hardware Info from the top of the screen. If the hardware checks out OK but the problem persists during normal server operations, a software error might be the cause. If you suspect a software problem, refer to the information that comes with the software package. Viewing the test log: If you are already running the diagnostic programs, continue with step 4 in this procedure. To view the Test Log: 1. Turn on the server and watch the screen. If the system is turned on already, shut down the operating system and restart the server. 2. When the message Press F2 for Diagnostics appears, press F2. If a power-on password or administrator password is set, the system prompts you for it. Type in the appropriate password; then, press Enter. 3. The Diagnostic Programs screen appears. After you run diagnostic tests or abort the diagnostic tests, the utility option appears at the top of the screen. 4. Select Utility from the top of the screen. 5. Select View Test Log from the list that appears; then, follow instructions on the screen. 6. Press Esc to return to the Diagnostic Programs screen. 7. Select Quit from the top of the screen; then, select Exit Diags to exit from the diagnostic programs. The server restarts. Netfinity 5000 - Type 8659 13
![](/manual_guide/products/ibm-86595ry-hardware-maintenance-manual-a5411ab/21.png)