IBM 865951Y Hardware Maintenance Manual - Page 114
Align the holes on the bracket with the cage, rack enclosure.
UPC - 087944501824
View all IBM 865951Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
4. Attach the slide rail to the right side of the rack enclosure. a. Extend the outer slide rail until the slide bracket is flush against the outside of the right front mounting rail. Align the slide bracket with the cage nuts on the mounting rail. b. From the front of the rack enclosure, insert two long screws through the slide bracket and mounting rail. Press the slide rail so that it is flush with the outer edge of the mounting rail and tighten the screws. c. Attach the slide bracket to the right rear of the rack enclosure. 1) Align the holes on the bracket with the cage nuts on the rear mounting rail. 2) From the rear of the rack enclosure, insert a long screw through holes in the slide bracket and mounting rail; then, tighten the screws. 5. Attach the cable-management arm to the right rear of the rack enclosure. 106 Netfinity Server HMM