IBM 865951Y Hardware Maintenance Manual - Page 111
Attach the inner slide of each slide rail to the, removed in step 1a.
![]() |
UPC - 087944501824
View all IBM 865951Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
To prepare the Netfinity 5000 for installation in a rack enclosure: 1. Attach the cable-arm bracket to the rear of the server. a. Remove the two screws at the left of the primary power supply. b. Align the cable-arm bracket with the screw holes, keeping the solid arm of the bracket toward the side of the server. Make sure the openings in the bracket align with the power supply LEDs and the fan. c. Attach the bracket with the two screws you removed in step 1a. 2. Attach the inner slide section of each slide rail to the side of the server. a. Pull the inner slide until the safety latch locks. b. Press the safety latch; then, pull the inner slide firmly until it detaches from the outer slide rail. c. Align the holes on the inner slide with the holes on sides of the server; then, attach the slide with three pan-head short screws (M4 by 5 mm). Netfinity 5000 - Type 8659 103
![](/manual_guide/products/ibm-86595ry-hardware-maintenance-manual-a5411ab/111.png)