IBM 865951Y Hardware Maintenance Manual - Page 35
Using the administrator password menu, The Power-on Password menu appears.
UPC - 087944501824
View all IBM 865951Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
the power-on password as described in steps 1 through 5 above. 5. Turn the server off again. 6. Set switch 8 back to Off. 7. Restart the server. To delete a power-on password: 1. Select Power-on Password from the System Security menu; then, press Enter. The Power-on Password menu appears. 2. Select Delete Power-on Password; then, press Enter. 3. A confirmation window appears. Press Enter to delete the power-on password. Press Esc to cancel the request and return to the System Security menu. To allow the server to start in unattended mode when a power-on password is set: Note If the password data field is set to On, the Unattended Start and Stop modes are not supported. 1. Select Power-on Password from the System Security menu; then, press Enter. The Power-on Password menu appears. 2. Select Allow for unattended boot with password. Press the Left Arrow (←) or Right Arrow (→) key to toggle the entry to On. If no power-on password is set on the server, this option has no effect. Using the administrator password menu: The administrator password (sometimes called a supervisor-level password) controls access to some features of the server, including the Configuration/Setup Utility program. Important If an administrator password is set and then forgotten, it cannot be overridden or removed. You must replace the system board. To set an administrator password: 1. Select Administrator Password from the System Security menu; then, press Enter. 2. Type the password in the Enter Administrator Password data field. A password can contain any combination of up to seven alphanumeric characters (A-Z, a-z, and 0-9). Keep a record of the password in a secure place. Netfinity 5000 - Type 8659 27