IBM 865951Y Hardware Maintenance Manual - Page 113
two long screws through the slide bracket, From the rear of the rack enclosure, insert
UPC - 087944501824
View all IBM 865951Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
a. Extend the outer slide rail until the slide bracket is flush against the outside of the left front mounting rail. Align the slide rail with the cage nuts on the mounting rail. b. From the front of the rack enclosure, insert two long screws through the slide bracket and mounting rail. Press the slide bracket until it is flush with the outer edge of the mounting rail; then, tighten the screws. c. Attach the slide bracket to the left rear side of the rack enclosure. 1) Align the holes on the slide bracket with the cage nuts on the rear mounting rail. 2) From the rear of the rack enclosure, insert two long screws through the slide bracket and mounting rail; then, tighten the screws. 3) If it was necessary to adjust the length of the slide rails, tighten the nuts on the slide rail, using pliers, a socket wrench, or an adjustable wrench. Netfinity 5000 - Type 8659 105