IBM 9114-275 Installation Guide - Page 27
Step 14. Are You Using an Ethernet Connection?, the System
![]() |
View all IBM 9114-275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Step 14. Are You Using an Ethernet Connection? If you are unsure whether you are using an Ethernet connection, ask your system administrator. If you are not using Ethernet or you have already connected your Ethernet to an adapter, continue to "Step 15. Connect the Power Cables to the System" on page 12. To connect the Ethernet cable, do the following: Note: The twisted-pair connector is compatible with the IEEE 802.3 Ethernet network 10/100/1000 Base T link. 1. Connect the twisted-pair cable to one of two RJ-45 connectors located on the rear of the system drawer. For RJ-45 connector locations, see the following illustration. 2. The twisted-pair Ethernet cable is now installed. Continue with "Step 15. Connect the Power Cables to the System" on page 12. Chapter 1. Setting Up the System 11
![](/manual_guide/products/ibm-9114275-installation-guide-4bf8d2f/27.png)