IBM 9114-275 Installation Guide - Page 60
Media Bay Chassis, Removing the Media Bay Chassis
![]() |
View all IBM 9114-275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Media Bay Chassis Before performing the following procedures, read "Safety Notices" on page vii. Removing the Media Bay Chassis To remove a the media bay chassis, do the following: 1. Shut down the system as described in "Stopping the System" on page 25. 2. Place the system into the service position as described in "Placing the Model 275 into the Service and Operating Position" on page 26. 3. Remove the front bezel as described in "Bezels" on page 27. 4. Press the media bay chassis latches, and pull the bay chassis from the system chassis. Note: If you are servicing a Model 275, the operator panel will remain in the media bay chassis while it is removed. 1 Model 275 2 Media Bay Chassis 3 Front Bezel Replacing the Media Bay Chassis To replace the media bay chassis, do the following: 1. Align the media bay chassis with the chassis opening and press the chassis into place until the latches lock. 2. Replace the front bezel as described in "Bezels" on page 27. 3. Return the system to the operating position as described in "Placing the Model 275 into the Service and Operating Position" on page 26. 4. Start the system as described in "Starting the System" on page 25. 44 IntelliStation POWER 9114 Model 275 Installation Guide
![](/manual_guide/products/ibm-9114275-installation-guide-4bf8d2f/60.png)