IBM 9114-275 Installation Guide - Page 53
Replacing the Fan Tray Assembly, If your system does not contain a SCSI media device
![]() |
View all IBM 9114-275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Replacing the Fan Tray Assembly To replace the fan tray assembly, do the following: 1. Confirm that the latch buttons are in the unlocked position 2. Align the guides on the front of the fan tray with the guide rails in the chassis. 3. Lower the fan tray into the system with the LED light pipe cover plate toward the LED light pipes, and press it down into place. 4. Press the latch buttons down until you feel them lock. 5. Latch the LED light pipe plate over the LED light pipes. Be sure to align the LED light pipes with the appropriate holes in the LED light pipe plate. 6. If your system does not contain a SCSI media device, go to the next step. If your system does contain SCSI media device, press the media bay chassis into place until you feel the latches lock. 7. Replace the service access cover as described in "Service Access Cover Replacement" on page 28. 8. Return the system to the operating position as described in "Placing the Model 275 into the Service and Operating Position" on page 26. Chapter 3. Installing Options 37
![](/manual_guide/products/ibm-9114275-installation-guide-4bf8d2f/53.png)