IBM 9114-275 Installation Guide - Page 59
SCSI Media Devices, SCSI Media Device Removal, SCSI Media Device Installation or Replacement
![]() |
View all IBM 9114-275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
1 Service Access Cover 2 Model 275 3 Slimline Diskette (Media Bay 2) 4 Slimline CD-ROM (Media Bay 1) 5 SCSI Media Device (for example: Tape Drive, DVD-RAM Drive) SCSI Media Devices The SCSI media device bay is a full-height bay for SCSI devices only. SCSI Media Device Removal To remove a SCSI media device, do the following: 1. Open the bezel door. 2. Remove the media bay chassis as described in "Media Bay Chassis" on page 44. 3. Unplug the SCSI cable and power cable from the rear of the SCSI media device and the backplane at the rear of the media bay chassis. 4. Detach the media drive from the media bay chassis. 5. Put the media drive in a safe place. SCSI Media Device Installation or Replacement To replace a media device, do the following: 1. Before handling any card, board, or memory DIMM, be sure to use your electrostatic discharge strap to minimize static-electric discharge. Refer to "Handling Static-Sensitive Devices" on page 24. 2. Attach the media drive to the media bay chassis. 3. Plug the SCSI cable and the power cable into the rear of the SCSI media device and the backplane at the rear of the media bay chassis. 4. Replace the media bay chassis as described in "Media Bay Chassis" on page 44. 5. Replace the bezel as described in "Front Bezel Replacement" on page 27. Replacing SCSI Media Device Power Cables and SCSI Cables To replace SCSI media device power cables or SCSI cables, see "SCSI Media Device Removal" and "SCSI Media Device Installation or Replacement". Chapter 3. Installing Options 43
![](/manual_guide/products/ibm-9114275-installation-guide-4bf8d2f/59.png)