IBM 9114-275 Installation Guide - Page 49
and Operating Position on Connect the adapter cables.
![]() |
View all IBM 9114-275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
13. Lower the tab onto the PCI adapter faceplate. Rotate the adapter retainer clip clockwise until it covers the tab at approximately a 45-degree angle. See the following illustration. 3 2 4 5 1 1 Model 275 2 Adapter Retainer Assembly (in the unlocked position) 3 Adapter Retainer Assembly (retainer seat down and the retainer clip in the unlocked position) 4 Adapter Retainer Assembly (retainer seat down and the retainer clip in the locked position) 5 PCI adapter faceplate (dotted lines) 14. If you have other options to install, refer to "Options and Task List" on page 24. If you do not have other options to install, continue on to the next step. 15. Replace the service access cover as described in "Service Access Cover Replacement" on page 28. 16. Return the system to the operating position as described in "Placing the Model 275 into the Service and Operating Position" on page 26. 17. Connect the adapter cables. 18. Reconnect the power source to the system. 19. Power on the system as described in "Starting the System" on page 25. 20. Replace the bezel door if it was removed in one of the previous steps. Chapter 3. Installing Options 33
![](/manual_guide/products/ibm-9114275-installation-guide-4bf8d2f/49.png)