IBM 9114-275 Installation Guide - Page 43
Bezels, Front Bezel Removal, Front Bezel Replacement, Model 275, Front Door, Bezel-release lever
![]() |
View all IBM 9114-275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Bezels Before performing the following procedures, read the "Safety Notices" on page vii. Front Bezel Removal Refer to the following illustrations while you perform the steps in this procedure. To remove the front bezel, do the following: 1. Remove the bezel door as described in "Bezel Door" on page 26. 2. Press down on the two blue bezel-release levers. 3. Pull the top of the bezel out and away from the system chassis. 4. Gently pull the bezel up off the base, releasing the lower bezel locking tabs. 5. Put the bezel and bezel door in a safe place. 1 Model 275 2 Bezel-release lever 3 Front Bezel 4 Front Door 5 Lower Bezel Locking Tab (Quantity 2) 6 Lower Bezel Retaining Slots (Quantity 2) Front Bezel Replacement To replace the front bezel, do the following: 1. Place the two lower bezel locking tabs into the retaining slots located on the chassis base. 2. Rotate the bezel up toward the top of the chassis, ensuring that the aligning pins are aligned with their mating holes located on the chassis. 3. Gently push the bezel in until the two blue bezel release levers are seated in their respective slots. 4. Replace the bezel door as described in "Bezel Door" on page 26. Chapter 3. Installing Options 27
![](/manual_guide/products/ibm-9114275-installation-guide-4bf8d2f/43.png)