IBM HC10 User Guide - Page 29
Opening, blade, workstation, cover
![]() |
UPC - 883436017671
View all IBM HC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Opening the blade workstation cover The following illustration shows how to open the cover on a blade workstation. Cover pins Blade-cover release Blade-cover release To open the blade workstation cover, complete the following steps: 1. Read the safety information that begins on page v and "Installation guidelines" on page 15. 2. If the blade workstation is installed in a BladeCenter unit, remove it (see "Removing the blade workstation from the BladeCenter unit" on page 16 for instructions). 3. Carefully lay the blade workstation on a flat, static-protective surface, with the cover side up. 4. Press the blade-cover release on each side of the blade workstation and lift the cover open, as shown in the illustration. 5. Lay the cover flat, or lift it from the blade workstation and store it for future use. Statement 21: CAUTION: Hazardous energy is present when the blade is connected to the power source. Always replace the blade cover before installing the blade. Chapter 3. Installing optional devices 17
![](/manual_guide/products/ibm-hc10-user-guide-8a12bb9/29.png)