IBM HC10 User Guide - Page 48
Using, agent, utility, program, Firmware, updates
UPC - 883436017671
View all IBM HC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3. Under Popular links, click Publications lookup. 4. From the Product family menu, select BladeCenter HC10 and click Continue. Using the PXE boot agent utility program Use the Preboot Execution Environment (PXE) boot agent utility program to select the boot protocol and other boot options and to select a power-management option. Note: The blade workstation does not support Remote Program Load (RPL) selection for the boot protocol option. To start the PXE boot agent utility program, complete the following steps: 1. Turn on the blade workstation. 2. When the Broadcom NetXtreme Boot Agent vX.X.X prompt is displayed, press Ctrl+S. You have 2 seconds (by default) to press Ctrl+S after the prompt is displayed. If the PXE setup prompt is not displayed, use the Configuration/Setup Utility program to set the Enable Ethernet PXE/DHCP option. 3. To select a choice from the menu, use the arrow keys and press Enter. 4. To change the setting of the selected item, follow the instructions on the screen. Firmware updates IBM periodically makes firmware updates available for the blade workstation. Go to http://www.ibm.com/systems/support/ and check the firmware versions that are available. Click Monitors → Firmware VPD in the Advanced Management Module user interface to check the firmware levels in the blade workstation. If the date and revision level on the Web site is later than the date and revision level in the blade workstation, download and install the firmware from the Web. To locate the blade workstation firmware updates, complete the following steps: 1. Go to http://www.ibm.com/systems/support/. 2. Under Product support, click BladeCenter. 3. Under Popular links, click Software and device drivers. 4. Click BladeCenter HC10 to display the matrix of downloadable files for the BladeCenter product. The blade workstation ships with the following firmware levels, or later. Table 1. Firmware shipped on the blade workstation Firmware Build ID BIOS DOE114A Diagnostics DOYT02A Blade sys. mgmt. proc. DOBT12A Broadcom Ethernet NIC T3.4.6 Graphics and I/O Transmission Adapter Build 12 Date 06/15/2007 06/15/2007 06/15/2007 06/15/2007 06/21/2007 Revision 1.14 1.0 0.12 Not applicable Not applicable The firmware in the Advanced Management Module must be the following version or later. See the Advanced Management Module User's Guide for information about how to download and install firmware for the management module. 36 BladeCenter HC10 Type 7996: Installation and User's Guide