IBM IC35L036UWDY10 Hard Drive Specifications - Page 100
Descriptor, Rigid Disk Geometry Parameters
UPC - 000004119524
View all IBM IC35L036UWDY10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
8.8.1.3 Page Descriptor Byte 0 Byte 1 Byte 2-n PS RSVD= 0 Page Code Page Length Mode Parameters Figure 85. MODE Parameter Page Format Each mode page contains a page code, a page length, and a set of mode parameters. When using the MODE SENSE command, a Parameter Savable (PS) bit of one indicates that the mode page can be saved by the drive in the reserved area of the drive. A PS bit of zero indicates that the supported parameters cannot be saved. When using the MODE SELECT command, the PS bit is reserved (zero). The drive supports the following mode page code: Page Description PS 00 Vendor Unique Parameters 1 01 Read-Write Error Recovery Parameters 1 02 Disconnect/Reconnect Control Parameters 1 03 Format Device Parameters 0 04 Rigid Disk Geometry Parameters 0 07 Verify Error Recovery Parameters 1 08 Caching Parameters 1 0A Control Mode Page 1 0C Notch Parameters 1 19 Port Control Page 1 1A Power Control Parameters 1 1C Informational Exceptions Control 1 Figure 86. Page Code Usage The page length field specifies the length in bytes of the mode parameters that follow. If the initiator does not set this value to the value that is returned for the page by the MODE SENSE command, the drive will terminate the command with CHECK CONDITION status. Ultrastar 146Z10 hard disk drive specifications 84