IBM IC35L036UWDY10 Hard Drive Specifications - Page 80
LOG SELECT 4Ch, Reserved = 0, Parameter List Length, Command Code = 4Ch
![]() |
UPC - 000004119524
View all IBM IC35L036UWDY10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
8.6 LOG SELECT (4Ch) Byte 0 1 2 3 4 5 6 7 8 9 Bit 7 6 5 4 3 2 1 0 Command Code = 4Ch Reserved = 0 Reserved = 0 PCR SP PC Reserved = 0 Reserved = 0 (MSB) Parameter List Length Reserved = 0 (LSB) FLAG LINK Figure 63. LOG SELECT (4C) The LOG SELECT command provides a means for the initiator to clear statistical information maintained by the drive and reported via the LOG SENSE command. ! PCR The Parameter Code Reset determines whether the LOG SENSE parameters will be cleared and unit attention posted for all other initiators. A value of 1 indicates that the parameters be cleared, while a value of zero (except when PC = 11b) indicates that the parameters not be cleared. ! SP The Save Parameters bit value of zero indicates that the page parameters not be saved. A value of 1 indicates that the page parameters that are savable be saved after they have been changed. ! PC The Page Control field defines the type of parameters to be selected. The PC field set to 11b (and PCR is then a don't care) indicates that the Default Cumulative values are set to their default values of 0. If the PC field is set to 01b and PCR is set to 1, the Current Cumulative values are also set to their default values. ! Parameter List Length The Parameter List Length field specifies the length in bytes of the parameter list that shall be located in the DATA OUT buffer. A parameter list length zero indicates that no pages shall be transferred. If one or more fields of the CDB are not set correctly the command will be terminated with a CHECK CONDITION status. The Sense Key shall be set to ILLEGAL REQUEST and the additional sense code set to INVALID FIELD IN CDB. The LOG SELECT command will reset the counter variables to their default values of zero. These variables are listed in the LOG SENSE command. To indicate that parameters have changed, the drive generates a unit attention condition for all initiators except the one that issued the LOG SELECT command. Ultrastar 146Z10 hard disk drive specifications 64
![](/manual_guide/products/ibm-ic35l036uwdy10-hard-drive-specifications-4359dfe/80.png)