Insignia NS-L19X-10A User Manual (English) - Page 15

NS-L19X-10A_09-0241_MAN_V2_English.book Page 11 Tuesday, April 7, 2009 9:29 AM 3 Connect the other end of the component video cable to the COMPONENT1 IN jacks on the back of your TV (you can also use the COMPONENT2 IN jacks on the side of your TV). 4 Connect an audio cable to the AUDIO OUT jacks (L/R) on the component device. 5 Connect the other end of the audio cable to the COMPONENT AUDIO-R and AUDIO-L jacks on the back of your TV. To play from a component device: 1 Turn on your TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press or to select Component 1 or Component 2, then press ENTER. Tip You can also press COMP repeatedly for Component 1 or Component 2. 3 Turn on the component video device and set it to the correct output mode. See the component video device's user guide for more information. Connecting a computer Tip Some computers have an HDMI connector, which can be used for a better picture. To connect a computer: 1 Make sure that your TV's power cord is unplugged and the computer is turned off. 2 Connect a VGA cable to the VGA jack on the computer, then connect the other end of the cable to the VGA PIC jack on the back of your TV. Note The VGA cable should be a 15-pin D-Sub (analog RGB) cable. Computer To play video from a computer: 1 Turn on your TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press or to select VGA, then press ENTER. 3 Turn on the computer, then adjust the display properties, if necessary. Connecting an audio amplifier To connect an audio amplifier: 1 Make sure that your TV's power cord is unplugged and the amplifier is turned off. 2 Connect an audio cable to the AUDIO OUT jacks (L/R) on your TV. Back of TV Amplifier  Audio cable Note: Cables are often color-coded to connectors. Connect red to red and white to white. 3 Connect the other end of the cable to the audio input jacks (L/R) on your amplifier. To play the TV sound through an audio amplifier: 1 Turn on your TV and select a program to watch. 2 Turn on your amplifier, select the TV sound source, then adjust the volume to a comfortable level. Back of TV Audio cable (stereo mini plugs) VGA cable (analog RGB) 3 Connect an audio cable to the AUDIO OUT jack on the computer, then connect the other end of the cable to the VGA AUDIO jack on the back of your TV. Note The audio cable should have a stereo mini plug. www.insigniaproducts.com 11