Intel PRO/100 Setup Guide - Page 20
AppleTalk Configuration - s driver
UPC - 735858110105
View all Intel PRO/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
AppleTalk Configuration The NetportExpress print server can service print jobs submitted by Macintosh* workstations connected to an Ethernet or token ring network. To print using LocalTalk*, connect the print server through a router to an Ethernet segment. To configure the NetportExpress print server for AppleTalk 1 At the Windows workstation where you installed Netport Man- ager, start that program. 2 Select the print server whose Device ID matches the number of the NetportExpress print server you have installed. 3 Click the Configure button. 4 Select AppleTalk. 5 Select a zone name for the NetportExpress print server in the AppleTalk Zone field. 6 Click on a Port tab. 7 Type a Chooser Name so the printer will appear in the Chooser on Macintosh workstations. 8 Identify the Printer Type where the print server is connected. This must match the printer driver name shown in the Chooser. The default LaserWriter* will work for any PostScript* printer. 9 Select the Font Group that resides on the printer. Default is 35. Note: If your printer supports bi-directional communication capability, the default will be "automatically set by printer." 10 Click OK to complete the set up. To set up a workstation to print 1 At an Apple workstation, open Chooser. 2 Select the printer driver for the printer connected to the NetportExpress print server. If you're using a PostScript printer, you can select either LaserWriter or the PostScript printer icon for your printer. 3 If the Chooser window displays an AppleTalk Zone list, select the zone you specified when setting up the print server. 4 Select the Chooser name for the NetportExpress print server you want the Macintosh workstation to use. 5 Close the Chooser window. 18