Intel PRO/100 Setup Guide - Page 38

r The network may not be connected to the print server. Use ping from a UNIX workstation to check IP connectivity to the Netport print server's TCP/IP task. r If using proprint on an SCO, Solaris, UnixWare, or HP-UX host, the complete path may need to be defined to proprint. Make sure the lp_scrpt1 file specifies the correct and complete path to the proprint utility. Also make sure the job number is specified. The next-to-last line of lp_scrpt1 must read: (shell commands ...) | usr/intl/hupx/proprint 'basename $0' job=1 exit $ ? r If using proprint, program may not be working. Check it by printing a job from the command line without using the spooling system. r If using lpd without proprint and printing binary or PostScript files, you may be using the wrong queue name. Make sure the queue name is LPT1_PASSTHRU forASCII files. Queues fill up but nothing prints r Another print server may be servicing the queue. Select a different queue or change the queue that the other print server is using. r The printer may be off line or set for the wrong type of port (parallel or serial). Check the printer and ports. r The network may not be connected. Check the network connection. Can you print a test page? If you can, check the network connection between the workstation and the print server. Also check the connection at the hub or switch. r If the job appears to print but nothing comes out of the printer, the job may be going to a different printer. r The driver parameters may be incorrect. You may be trying to send a PostScript job to a non-PostScript printer or sending a non-PostScript job to a PostScript printer. Print job doesn't print correctly r May be using wrong printer driver. Make sure the printer driver is the right one for the printer. r May need to toggle the printer's auto sensing of PostScript print jobs. r A Postscript printer may be trying to print a non-PostScript job. Check the job and the printer. r If you are copying a graphics (binary) file to LPT1, you may have the wrong parameter setting. Use the /b parameter: Type: copy /b filename lpt1 36