Intel PRO/100 Setup Guide - Page 35
Troubleshooting the NetportExpress, Print Server - printing problems
UPC - 735858110105
View all Intel PRO/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Troubleshooting the NetportExpress Print Server The key to successfully troubleshooting printing problems is to have a systematic approach and to know where to look for help. This section lists the most likely causes for some common printing problems. Along with this troubleshooting section, you can check these resources: • Netport Manager Help • Troubleshooting Help (Click the Troubleshooting icon in the Netport Manager window.) • Web help (located on the CD-ROM) • Intel's automated customer support pages and Intel's online customer support (see page 43). Hardware problems No lights on NetportExpress print server r There is no power to unit. Check power sources. r Cables are not securely seated in connectors. Check connections. r You're trying to run a PRO/100 on a 100Mbps network but the hub doesn't support 100Mbps. Check the hub. r Network cable is not connected. Check the connection. Blinking red activity light on print server Number of blinks Cause 1- 4, 8 5 6 7 Unit failure. Contact your vendor or Intel's Customer Support Serial port failure. Disconnect all devices from the print server. Disconnect, then reconnect the print server power cable. Parallel port failure. Disconnect all devices from the print server. Disconnect, then reconnect the print server power cable. Network interface failure. Replace the network cable or attach the print server to a different network location. 33