Intel PRO/100 Setup Guide - Page 37

r Print server is offline or is not functioning. Check that the lights on the NetportExpress print server are on. Press the diag button on the device to print a test page to check its configuration. r Printer cable is too long or may be bad. Check that the printer cable is six feet or less in length. If you suspect something is wrong with the cable, replace it with a known good cable. Can't print in AppleTalk r The network may be set up incorrectly. Check the control panel to make sure the network is LocalTalk*, EtherTalk*, or TokenTalk*, as appropriate. If the network is running EtherTalk, make sure it is EtherTalk Phase 2. To print using Phase 1, connect the Macintosh to the network with a router, such as Apple Internet Router* or Liaison Internet Router*, that routes Phase 1 to Phase 2. r NetportExpress print server may not be configured for AppleTalk printing. Check the print server configuration. r The selected printer may not match the Printer Type specified in Netport Manager. Check that the name is exactly the same, including upper and lower case and spaces. Can't print in LAN Manager or LAN Server r Queues may have been created on a system that isn't running LAN Manager or LAN Server. Check queue locations. r Queues may have been mapped to the wrong port. Make sure the queues are mapped to LPT1, LPT2, or LPT3 on the system running LAN Manager or LAN Server. r Queues may be set up wrong. Make sure queues are set up so that one logical LPT port is associated with one physical LPT port. Queues must not all map to the logical device LPT1. Can't print in UNIX r You may have typed the tar command used to extract the proinstall files incorrectly. Check the manual. r Your print setting may be incorrect. Most applications use the PASSTHRU setting to print. This command is used for PCL and PostScript printer languages. Use TEXT only if you are printing a UNIX text file. 35