Intel SBX44 User Guide - Page 37

surface on any other grounded rack component. Then, surface on the chassis or any

Get Intel SBX44 - Server Compute Blade PDF manuals and user guides View all Intel SBX44 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

7. PC2100 DIMMs are backward-compatible and work in the PC1600 sockets. The following illustration shows how to install DIMMs on the system board. A DIMDMIMD1MIMD2MIMD3MIMD4MIMD5MIMD6MIM7M 8 TP00490 Before you begin, read the documentation that comes with your option. Complete the following steps to install a DIMM: 1. Review the information in "General Safety" and "Electrical Safety" beginning on page vi and "Installation guidelines" on page 19. 2. Shut down the operating system, turn off the blade server, and remove the blade server from the system chassis. See "Removing the blade server from the system chassis" on page 19 for instructions. 3. Carefully lay the blade server on a flat, non-conductive surface. 4. Open the blade server cover. See "Opening the blade server cover" on page 20 for instructions. 5. Locate the DIMM connectors on the system board. Determine the connectors into which you will install the DIMMs. (See note 3 on page 24) 6. Touch the static-protective package that contains the DIMM option to any unpainted metal surface on the chassis or any unpainted surface on any other grounded rack component. Then, remove the DIMM from the package. 7. To install the DIMMs, repeat the following steps for each DIMM that you install: a. Turn the DIMM so that the keyed notch (A) aligns correctly with the connector on the system board. Note that the keyed notch (A) is slightly left of center. Attention: To avoid breaking the retaining clips or damaging the DIMM connectors, handle the clips gently. Installing options 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Installing options
25
7.
PC2100 DIMMs are backward-compatible and work in the PC1600 sockets.
The following illustration shows how to install DIMMs on the system board.
Before you begin, read the documentation that comes with your option.
Complete the following steps to install a DIMM:
1.
Review the information in “General Safety” and “Electrical Safety” beginning on page vi and
“Installation guidelines” on page 19.
2.
Shut down the operating system, turn off the blade server, and remove the blade server from the
system chassis. See “Removing the blade server from the system chassis” on page 19 for
instructions.
3.
Carefully lay the blade server on a flat, non-conductive surface.
4.
Open the blade server cover. See “Opening the blade server cover” on page 20 for instructions.
5.
Locate the DIMM connectors on the system board. Determine the connectors into which you
will install the DIMMs. (See note 3 on page 24)
6.
Touch the static-protective package that contains the DIMM option to any
unpainted
metal
surface on the chassis or any
unpainted
surface on any other grounded rack component. Then,
remove the DIMM from the package.
7.
To install the DIMMs, repeat the following steps for each DIMM that you install:
a.
Turn the DIMM so that the keyed notch (A) aligns correctly with the connector on the
system board. Note that the keyed notch (A) is slightly left of center.
Attention:
To avoid breaking the retaining clips or damaging the DIMM connectors,
handle the clips gently.
TP00490
DIMM 1
DIMM 2
DIMM 3
DIMM 4
DIMM 5
DIMM 6
DIMM 7
DIMM 8
A