Intel SBX44 User Guide - Page 79
assembly. Disconnect the power cable from the connector C on the I/O board. Swing the I/O
View all Intel SBX44 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
6. Disconnect the three flex ribbon cables (A) from the connectors on the underside of the I/O board. ✏ Important ✏ Flex ribbon cables can be damaged if not properly handled during disconnection. Use the following recommended procedure to disconnect a flex ribbon cable from its I/O board connector: • Use the pull straps and pull evenly so as not to damage the connector. • Repeat this process for all three flex ribbon cables. Unlatch the I/O board power cable from the hooks (B) on the underside of the I/O board assembly. Disconnect the power cable from the connector (C) on the I/O board. Swing the I/O board assembly down (D). D A C B TP00460 Service replaceable units 67
Service replaceable units
67
6.
Disconnect the three flex ribbon cables (A) from the connectors on the underside of the I/O
board.
Important
Flex ribbon cables can be damaged if not properly handled during disconnection. Use the
following recommended procedure to disconnect a flex ribbon cable from its I/O board
connector:
•
Use the pull straps and pull evenly so as not to damage the connector.
•
Repeat this process for all three flex ribbon cables.
Unlatch the I/O board power cable from the hooks (B) on the underside of the I/O board
assembly. Disconnect the power cable from the connector (C) on the I/O board. Swing the I/O
board assembly down (D).
TP00460
C
B
A
D