Intel SBX44 User Guide - Page 42
heat sink. Lower the retention mechanism B over the heat sink and tighten down
View all Intel SBX44 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
a. Orient the heat sink so that the side with the thermal interface material is visible. Ensure that no visible debris is present on the bottom of the heat sink or thermal interface material. TP00699 b. Do not touch the thermal interface material on the heat sink. Touching the thermal interface material will contaminate it. c. Align and place the heat sink (A) on top of the microprocessor. Press down firmly on the heat sink. Lower the retention mechanism (B) over the heat sink and tighten down the captive mounting screw (C). Some downward pressure will be required to tighten the screw. Do not over-tighten the screw. A C B TP00714 10. Reinstall the air baffle. ✏ NOTE CPUs may overheat if the clear plastic air baffle is not installed. 30 Intel® Server Compute Blade SBX44: Installation and User's Guide