Intel SBXD132 User Guide - Page 26
Removing an Expansion Unit, Caution
UPC - 735858189408
View all Intel SBXD132 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2. If the blade server is installed in a SBCE unit, remove it (see "Removing the Blade Server from the Intel® Blade Server Chassis SBCE" on page 16 for instructions). 3. Carefully lay the blade server down on a flat, static-protective surface, with the cover side up. 4. Press the blade-cover release on each side of the blade server or expansion unit and lift the cover open, as shown in the illustration. 5. Lay the cover flat, or lift it from the blade server and store for future use. Caution: Hazardous energy is present when the blade server is connected to the power source. Always replace the blade cover before installing the blade server. Removing an Expansion Unit The following illustration shows how to remove an expansion unit from a blade server. Storage and I/O Expansion Blade Blade Expansion Connector Cover Blade-Cover Release Blade-Cover Release AF000642 To remove the expansion unit, complete the following steps: 1. Read the safety information beginning on page vii and "Installation Guidelines" on page 15. 2. If the blade server is installed in a SBCE unit, remove it (see "Removing the Blade Server from the Intel® Blade Server Chassis SBCE" on page 16 for instructions). 3. Carefully lay the blade server down on a flat, static-protective surface, with the cover side up. 4. Open the blade server cover, if one is installed (see "Opening the Blade Server Cover" on page 17 for instructions). 5. Remove the expansion unit: a. Press the blade-cover release on each side of the blade server. 18 Intel® Server Compute Blade SBXD132 Installation and User's Guide