Intel SBXD132 User Guide - Page 51
Installing the Expansion Unit Cover
UPC - 735858189408
View all Intel SBXD132 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Installing the Expansion Unit Cover The following illustration shows how to install the expansion unit cover. Note: Once the expansion unit is installed on the host blade server, the blade server cover is used as the expansion unit cover. Cover Cover release Cover release AF000937 Complete the following steps to install the expansion unit cover: 1. Read the Safety information beginning on page vii and "Installation Guidelines" on page 39. 2. Orient the cover over the expansion unit. 3. Lower the cover so that the slots at the rear slide down onto the pins at the rear of the expansion unit. 4. Pivot the cover closed and press it firmly into place until the cover-release latches click. Caution: Hazardous energy is present when the blade is connected to the power source. Always replace the blade cover before installing the blade. Intel® Server Compute Blade SBXD132 Installation and User's Guide 43